Clutch resevoir rebuild kit

persempre907 · Post by **persempre907** » Fri Apr 07, 2006 9:48 pm

Exactly,
here's another pic.
Ciao

:lick: :lick: :lick:

pencilbeam · Post by **pencilbeam** » Fri Apr 07, 2006 10:21 pm

I'm curious about how you would fit the choke lever(fast idler) unit with one of these aftermarket master cylinders? It looks to me like the perch is specially designed to fit the choke.

I'm sure there's a solution, but hate to make such a clean and simple hand control complicated.

These are some more traditional looking units from Bevelheaven.com (Sorry not in Europe)

http://www.bevelheaven.com/index3.html look at brake related parts on the left column.

Finnpaso · Post by **Finnpaso** » Sat Apr 08, 2006 5:22 pm

Sure there is solution and its very easy, cause we are talking about BRAKE pump! (not clutch, where is that fast idle nipple!) :funny: :funny: :funny: And seems, that this unit have that brake light switch also, what 907 and ST needs.

If i have time, ill try check, if can find that same pump from some other internet mc shop more cheaply... Anyway, this item is something very close, what i am looking to my ST4S. Anyawy these are not cheap and that Brembo is more expensive... all depends ab. price and shipping...

persempre907 · Post by **persempre907** » Sat Apr 08, 2006 5:28 pm

Pencilbeam,
I haven't tought about it, because I wouldn't change the clutch pump. I'm satisfied by the OEM part which have enough power, while I would want to enhance the braking power.
Ciao

persempre907 · Post by **persempre907** » Sat Apr 08, 2006 5:36 pm

Finn,
the shipment in Italy will be €. 11,00.
I already have seen on Internet and €. 195,00 seems to me the best price.
Let me know if you also is interested.
I also have found the Brembo pump 19x20 at €. 196,00.
http://www.redracingparts.com/it/italy. ... quantity=1.
So you have only to choose :lick: :lick: :lick:
Ciao

Coffee_Kid · Post by **Coffee_Kid** » Thu Apr 13, 2006 5:32 pm

Discovered this morning, after deciding to take the Duck to work for the first time in 8 weeks, that thclutch master had failed and leaked on my newly painted tank.

Words cannot describe the drama that unfolded this morning.

Yoyodyne is shipping a new master overnight to arrive tomorrow--they were very helpful and the price was right.

Back to the paint shop for cosmetic surgery.

Finnpaso · Post by **Finnpaso** » Thu Apr 13, 2006 7:28 pm

Fransesco, I am out of it now, cause, after 2 weeks, i have to pay all taxes, VATs, etc. from my ST4S to government and that bill is very high, so i must leave that pump to later time

persempre907 · Post by **persempre907** » Thu Apr 13, 2006 7:52 pm

I also have paid the insurance this month... and I can understand!
Ciao

pencilbeam · Post by **pencilbeam** » Fri Apr 14, 2006 1:42 pm

Coffee_Kid wrote:Discovered this morning, after deciding to take the Duck to work for the first time in 8 weeks, that thclutch master had failed and leaked on my newly painted tank.

Words cannot describe the drama that unfolded this morning.

Yoyodyne is shipping a new master overnight to arrive tomorrow--they were very helpful and the price was right.

Back to the paint shop for cosmetic surgery.

Did they have the exact replacement for the clutch master, or did you go with a different type? Looked on their website and didn't see anything. How much$
Thanks,

Finnpaso · Post by **Finnpaso** » Fri Apr 14, 2006 3:20 pm

That company makes at least slaves, but i dont know, maybe also pumps(masters).... They slave is quite similar, like STM, what is best...

Coffee_Kid · Post by **Coffee_Kid** » Fri Apr 14, 2006 8:39 pm

Just opened the box and it looks OEM Brembo, complete with the lever. Looks better than the original--now I may have to do the brake lever so that it looks right.

Or not. Looks great, though.

And the price was right. Less than $85 plus shipping.

Clutch resevoir rebuild kit

Trouble in Paradise

Re: Trouble in Paradise

Just got it