Page 1 of 1

Instrument panel connector

Posted: Sat Jul 05, 2025 3:44 pm
by yosemite
The warning lights have been playing up, have removed the instrument cluster and disconected the multiplug connectors, found a couple of wires had come loose from the terminals, so am assuming this to be the likely cause. I have spent a couple of fruitless hours searching to find what type of connector they are so I can get replacement, can anyone enlighten me please
have attached pic of the one that did not fall apart
Cheers
Yosemite

Re: Instrument panel connector

Posted: Sun Jul 06, 2025 3:31 pm
by Janky59
Take a look at the site Cycleterminal.com
They have a lot of motorcycle specific connectors, maybe they have them or you can find a part number at least and source them from the UK.
It is a US based business for what it’s worth. Good luck.

Re: Instrument panel connector

Posted: Mon Jul 07, 2025 8:23 am
by higgy
I would check with Ed Miltch at duc power.You could most likely score a complete harness for cheap and get all the terminals you Paso heart desires :choo:
Aside from that, good luck :roll:

Myself I bought a complete (except for the carb9 :mad:) basket case 906 for 300usd