In need of a Weber
In need of a Weber
Hi all
I know this is probably against most peoples idea But I had the Webber working grate. I don't like the Delorto's and prefer to have the bike more original.
I have just re-purchased my 750 Limited
I'm trying to bring it back to the bike is was.
The weber has been removed and discarded by previous owner.
So Please if anyone has one that would part with please let me know.
Regards from Aus
I know this is probably against most peoples idea But I had the Webber working grate. I don't like the Delorto's and prefer to have the bike more original.
I have just re-purchased my 750 Limited
I'm trying to bring it back to the bike is was.
The weber has been removed and discarded by previous owner.
So Please if anyone has one that would part with please let me know.
Regards from Aus
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
-
- paso grand pooh-bah
- Posts: 574
- Joined: Thu Oct 27, 2011 7:47 am
- model: 750 Sport
- year: 1988
- Location: Wollongong,Australia
Re: In need of a Weber
Where are you located?.
Re: In need of a Weber
Andrew
Wollongong NSW Australia
Wollongong NSW Australia
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
Re: In need of a Weber
Hi Lionel,
I've got one in a box of spares that came with my 750 Sport. Weber will be hardly used as it got swapped to Mikunis.
In Brisbane, Qld. We can discuss via PM.
Cheers Dave
I've got one in a box of spares that came with my 750 Sport. Weber will be hardly used as it got swapped to Mikunis.
In Brisbane, Qld. We can discuss via PM.
Cheers Dave
Re: In need of a Weber
Dave73 I will message U
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
Re: In need of a Weber
Hi Dave73
Been trying to contact U all the private messages I've sent seem to just stay in my out box.
U can contact me at lionel.burns@transport.nsw.gov.au
Been trying to contact U all the private messages I've sent seem to just stay in my out box.
U can contact me at lionel.burns@transport.nsw.gov.au
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
- paso750
- paso grand pooh-bah
- Posts: 5560
- Joined: Sun Jul 18, 2004 12:00 am
- model: 750 Paso
- year: 1987
- Location: southern Germany
Re: In need of a Weber
if messages are in the out box it means they were sent but not read yet
Re: In need of a Weber
Lionel, sorry I missed this. Notifications must have been going in my junk folder. Have sms and will send you an email.
Cheers Dave
Cheers Dave
Re: In need of a Weber
Got the weber from a 88 750 sport off dave73 thanks heaps. Removed the Delorto's and fitted the weber with great improvements in performance and starting
tried adding video not working
tried adding video not working
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
Re: In need of a Weber
What's your starting procedure? I put the Weber back on my '88 Limited. It had Mikuni flat slides, which worked pretty much flawlessly, but like you I wanted originality. It runs beautifully, but first start requires 3 good pulls on the throttle to squirt some fuel into the intake and full choke, and even then it's not exactly a clean start, acting like it's really lean. Thirty seconds to a minute later it's running perfectly.
1973 BMW R75/5
1976 Suzuki GT185
1983 Lavarda RGS 1000
1988 Ducati Paso 750
1995 BMW K75
1976 Suzuki GT185
1983 Lavarda RGS 1000
1988 Ducati Paso 750
1995 BMW K75
Re: In need of a Weber
two twists then just button no choke let idol for a few minutes
1988 Paso Limited
1929 Rudge special
2008 Ducati S4rs
97 TRX 850
1929 Rudge special
2008 Ducati S4rs
97 TRX 850