Page 2 of 2

Re: Updating the voltage regulator,almost done

Posted: Sat Apr 25, 2015 11:10 am
by higgy
Not quite finished yet but is now charging properly with dual headlights on.
Still need to route a few more wires through the new fusebox to get them off the battery and decide where I want to put the regulator permanently but it works :thumbup:

Image


Took the lithium out in favor of a glassmat while I am experimenting, lithium is kind of particular on charge rates

Re: Updating the voltage regulator

Posted: Fri Jul 05, 2024 3:22 pm
by demidesmo
Very interested replicating what the original poster has done as I've a Mosfet Rec knocking around a box of bits in the garage. I've been running HIDs for a couple of years and they are great in terms of being able to see things coming towards you. I may be asking questions in the not too distant future about the installation.

Re: Updating the voltage regulator

Posted: Sat Aug 17, 2024 7:59 pm
by steved001
Was the connector issue one of the bullet terminals up by the steering forks? I'm struggling with an underperforming charging system, no charge at idle, about 13 V at 2500. All bullet connectors for the reg. seem to be OK.