Search found 107 matches
- Sat Feb 08, 2014 3:03 pm
- Forum: 750 Paso
- Topic: Accidental Get-Off Hwy 1 - need body panels
- Replies: 5
- Views: 5057
Re: Accidental Get-Off Hwy 1 - need body panels
Radduck - sent you a PM.
- Thu Feb 06, 2014 3:26 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Thanks for the suggestion Jay. Unfortunately it didn't help. I may have found another engine. We'll see what happens.
- Tue Feb 04, 2014 5:34 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
I know about spinning the gearbox.
Is this the plug? If so, what should happen when I take it out and what comes out with it? Should the drum spin more freely?
Is this the plug? If so, what should happen when I take it out and what comes out with it? Should the drum spin more freely?
- Tue Feb 04, 2014 4:14 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Thanks Jay, I got it figured out. Something is causing the gear selector to bind. It's not moving nearly as freely as it needs to and seems to be getting worse which means a motor / trans teardown. I'm affraid I don't have the tools or the money to pursue this right now so I'm talking with someone r...
- Sat Feb 01, 2014 11:28 pm
- Forum: 750 Paso
- Topic: Stator cover pic?
- Replies: 6
- Views: 4754
Re: Stator cover pic?
Yep. I got that. I'm more concerned about the cable between where it exits the stator and gets to the rubber block. There's not much clearance in there between the flywheel and the cover and there's nothing holding the cable down. If the cable creeps after the cover is put on the flywheel will come ...
- Sat Feb 01, 2014 7:45 pm
- Forum: 750 Paso
- Topic: Stator cover pic?
- Replies: 6
- Views: 4754
Re: Stator cover pic?
Thanks for the pic. I'm trying to figure out how to keep the wire from ending up in the path of the flywheel. It's a trick keeping it tight against the cover.
- Fri Jan 31, 2014 10:42 pm
- Forum: 750 Paso
- Topic: Stator cover pic?
- Replies: 6
- Views: 4754
Stator cover pic?
Does anyone have a picture of the inside of the stator cover with the stator still in it? I need to run the wire from the stator but it's not clear how it stays clear of the flywheel.
- Sat Jan 25, 2014 11:12 pm
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Well, I think I figured it out... When I put the bike into first the dog arm is dropping down behind the drum pin and getting stuck... http://i1149.photobucket.com/albums/o600/ahdoman/DogStuck_zps3268917e.jpg After I shift into first it should look like this... http://i1149.photobucket.com/albums/o6...
- Sat Jan 25, 2014 9:02 pm
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Already messed with the clutch. Tried it with different tolerances to the retaining ring with no difference. While the clutch pack was out I also messed with finding neutral. It's just as difficult so the clutch isn't the problem. Also bled it. All seems to be well on the clutch side of the bike. :o...
- Sat Jan 25, 2014 3:42 pm
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Well, it looks like I'm going to have to take a look at the dog selector. How much oil comes out when I pull the alternator cover? Also, I didn't see a gasket for that cover is there one?
- Thu Jan 23, 2014 6:12 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Jay - how do you do the selector dog adjustment?
- Wed Jan 22, 2014 5:47 pm
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Clutch M/C was rebuilt about 6 months ago and fluid replaced. The clutch has been working great for the past 6 months. I repacked the the clutch assembly with spare discs and plates I had. Also changed the oil. No metal fragments in the oil so that was encouraging. I haven't had a chance to get the ...
- Wed Jan 22, 2014 3:29 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Thanks McTool. Do you know what your clearance is between the outside plate and your retaining ring? I've repacked the clutch with the thicker, one sided plate on the outside but it only leaves me with about 2.5mm of clearance. I was told you wanted closer to 6mm.
- Tue Jan 21, 2014 6:26 pm
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
Oil was done less than 2k miles ago (changing it now to see if there is any metal in it), clutch bled about 6 months ago. I was looking again at the clutch FAQ on this website and it shows the last friction disc (yellow) as being 3.5 mm and the drawing makes it looks like it is one sided. Is this th...
- Tue Jan 21, 2014 5:35 am
- Forum: 750 Paso
- Topic: Clutch Problem
- Replies: 25
- Views: 13856
Re: Clutch Problem
That may be possible but we were in the local mountains for most of the day and it was rather cold. Also, I've done long rides before in warmer weather without this happening. I'm also running with a vented cover now. I'm starting to think it may be something in the transmission because when its on ...