Search found 364 matches
- Wed Feb 07, 2018 6:14 pm
- Forum: 750 Sport and 900SS
- Topic: HELP! 17 inch wheel conversion. All AOK Except Speedo won't
- Replies: 20
- Views: 36356
Re: HELP! 17 inch wheel conversion. All AOK Except Speedo w
Hello G, Just seen your Q. https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F142449324398 The gold one screws straight onto the drive. Done quite a few 1000 miles and it still works. My speedo now reads about 5-10% slow so I have to be careful past cameras. The blue ...
- Fri Jan 26, 2018 8:49 am
- Forum: 750 Sport and 900SS
- Topic: HELP! 17 inch wheel conversion. All AOK Except Speedo won't
- Replies: 20
- Views: 36356
Re: HELP! 17 inch wheel conversion. All AOK Except Speedo w
Decent file. Checked it with vernier to get it right. I bought a batch of copper washers to substitute for drive to mock up and work out reqd width.
- Thu Jan 25, 2018 9:24 pm
- Forum: 750 Sport and 900SS
- Topic: HELP! 17 inch wheel conversion. All AOK Except Speedo won't
- Replies: 20
- Views: 36356
Re: HELP! 17 inch wheel conversion. All AOK Except Speedo w
I put showa’s on my 907 with a later 3spoke wheel w 25mm spindle. I took 2mm off the outside edge of the new type speedo drive to centre the wheel w no problems. Also the gearing was +50% reading fast. I put a mechanical km converter at the drive that almost corrects it.
- Thu Jan 04, 2018 9:29 pm
- Forum: 906 Paso
- Topic: starter rebuild kit
- Replies: 16
- Views: 20702
Re: starter rebuild kit
CG 125 brushes fit with a couple of minutes filing.
- Wed May 03, 2017 2:05 pm
- Forum: Aiming for the Apex
- Topic: picture thread - I have no words ...
- Replies: 266
- Views: 564693
- Thu Apr 06, 2017 8:41 am
- Forum: Events
- Topic: UK paso owners meet Spring 2017?
- Replies: 10
- Views: 20045
Re: UK paso owners meet Spring 2017?
Just taken mine off the road for a bit while I scare myself on my 999.
- Thu Apr 06, 2017 8:38 am
- Forum: Aiming for the Apex
- Topic: good bye
- Replies: 1
- Views: 11277
Re: good bye
RIP Boyd.
- Sat Feb 11, 2017 6:15 am
- Forum: for sale / for trade / want to buy
- Topic: wanted Ducati paso 750 header pipes
- Replies: 4
- Views: 5745
Re: wanted Ducati paso 750 header pipes
Ive got a set but in uk so costly to post?
- Tue Dec 27, 2016 12:08 pm
- Forum: 907IE
- Topic: Paso 20mm swingarm pivot modification
- Replies: 23
- Views: 20454
Re: Paso 20mm swingarm pivot modification
There was a guy from germany on here bock900R that put a ST4 motor and single sided arm in a 907 and finished it but we didnt get a road test report.http://forums.ducatipaso.org/viewtopic. ... 9&start=60 . Also JoKing on here put a ST3 motor in 907.
- Sat Dec 24, 2016 6:53 pm
- Forum: Off-topic
- Topic: MERRY CHRISTMAS FOLKS
- Replies: 4
- Views: 13142
Re: MERRY CHRISTMAS FOLKS
Merry Christmas all.
Cheers, Keith.
Cheers, Keith.
- Wed Dec 21, 2016 10:01 am
- Forum: for sale / for trade / want to buy
- Topic: 907IE Fuel Tank Wanted
- Replies: 12
- Views: 10215
Re: 907IE Fuel Tank Wanted
There is a variation in 907 tanks. I have seen one with a single breather while most have 2.
- Fri Aug 12, 2016 2:33 pm
- Forum: 907IE
- Topic: 907 crazy turn signals?
- Replies: 10
- Views: 9148
Re: 907 crazy turn signals?
Theres fllasher relays on ebay with adjustable flash rate for about £3 from china. It goes from flash per sec to strobe.I have one on my SSie with aftermarket indicators and its working fine but I've only had it a month. The 2 outer spade connectors were wrong way round so I had to make a sub loom r...
- Sat Aug 06, 2016 7:49 am
- Forum: 907IE
- Topic: My new 907 - little fixes before long distance riding
- Replies: 2
- Views: 4993
Re: My new 907 - little fixes before long distance riding
You can use a variety of front sprockets by making a spacer to fit on the outside of the sprocket to get correct offset. I cut a 5mm(i think) piece of dural the same shape as the securing ring with large hole in middle and two holes either side for the bolts. I now use SS sprockets with zero outer s...
- Fri Jul 08, 2016 3:19 pm
- Forum: for sale / for trade / want to buy
- Topic: 907 barrels and pistons for sale
- Replies: 8
- Views: 8218
Re: 907 barrels and pistons for sale
Rogers beard is camera shy i think. No images available at this time.
- Fri Jun 10, 2016 6:31 am
- Forum: for sale / for trade / want to buy
- Topic: 907 barrels and pistons for sale
- Replies: 8
- Views: 8218
Re: 907 barrels and pistons for sale
Saw you had Harley and beard Roger.
I'm a bit concerned.
I'm a bit concerned.